LED" title="LED">LED" title="LED">LED装饰灯,可调光LED照明,离线LED驱动器" title="LED驱动器">LED驱动器和商业照明.本文介绍了CS1610/11/12/13主要特性,方框图,典型应用电路以及典型反激电路图和降压电路图,以及CRD 1611-8W和CRD 1610-8W参考设计主要特性和指标.
The CS1610/11/12/13 is a digital control IC engineered to deliver a high-efficiency, cost-effective, flicker-free, phase-dimmable, solid-state lighting (SSL) solution for the incandescent lamp replacement market. The CS1610/11 is designed to control a quasi-resonant flyback topology. The CS1612/13 is designed to control a buck topology. The CS1610/12 and CS1611/13 are designed for 120VAC and 230VAC line voltage applications, respectively.
The CS1610/11/12/13 integrates a critical conduction mode (CRM) boost converter that provides power factor correction and dimmer compatibility with a constant output current, quasiresonant second stage. An adaptive dimmer compatibility algorithm controls the boost stage and dimmer compatibility operation mode to enable flicker-free operation to <2% output current with leading-edge, trailing-edge, and digital dimmers (dimmers with an integrated power supply).
CS1610/11/12/13主要特性:
• Best-in-Class Dimmer Compatibility
- Leading-edge (TRIAC) Dimmers
- Trailing-edge Dimmers
- Digital Dimmers (with Integrated Power Supply)
• Up to 90% Efficiency
• Flicker-free Dimming
• 0% Minimum Dimming Level
• Quasi-resonant Second Stage with Constant-current Output
Flyback and Buck
• Fast Startup
• Tight LED Current Regulation: Better than ±5%
• Primary-side Regulation (PSR)
• >0.9 Power Factor
• IEC-61000-3-2 Compliant
• Soft Start
• Protections:
- Output Open/Short
- Current-sense Resistor Open/Short
- External Overtemperature Using NTC
CS1610/11/12/13应用:
• Dimmable Retrofit LED Lamps
• Dimmable LED Luminaries
• Offline LED Drivers
• Commercial Lighting
图1.CS1610/11/12/13 方框图
图2.CS1610/11/12/13 典型应用电路图
图3.CS1610/11典型反激电路图
图4.CS1612/13典型降压电路图
CRD 1611-8W参考设计
The CRD 1611-8W reference design demonstrates the performance of the CS1611 resonant mode AC/ DC dimmable LED driver IC with a 550 mA output driving 4 LEDs in series. It offers best-in-class dimmer compatibility with leading edge, trailing edge, and digital dimmers. The form factor is targeted to fit into many LED bulb applications (A19, PAR).
CRD 1611-8W参考设计主要特性:
Quasi-resonant flyback with constant current output
Flicker-free dimming
Line voltage 230 VAC, ±10%
Rated input power: 8 W
Rated output power: 6.6 W
Efficiency: 83% at 550 mA, for 4 X LEDs in series
Low component count
Supports Cirrus Logic product CS1611
图5.CRD 1611-8W参考设计外形图
The CRD 1610-8W reference design demonstrates the performance of the CS1610 resonant mode AC/DC dimmable LED driver IC with a 470 mA output driving 5 X LEDs in series. It offers best-in-class dimmer compatibility with leading edge, trailing edge and digital dimmers. The form factor is targeted to fit into many LED bulb applications (A19, PAR).
CRD 1610-8W参考设计主要特性:
Quasi-resonant flyback with constant current output
Flicker-free dimming
Line voltage 120 VAC, ±10%
Rated input power: 8.1 W
Rated output power: 6.7 W
Efficiency: 84% at 470 mA, for 5 X LEDs in series
Low component count
Supports Cirrus Logic product CS1610
图5.CRD 1610-8W参考设计外形图
CRD 1610-8W和CRD 1611-8W参考设计主要指标:
详情请见:
http://www.cirrus.com/en/pubs/proDatasheet/CS1610-11-12-13_F3.pdf
和
http://www.cirrus.com/en/pubs/brochure/LED_Brochure.pdf
大幅加速流程的无线测试新方案盘点随着频率逐渐攀升到新的高度，无线和射频测试的复杂度和成本也在不断增加。事实上，目前千兆赫级频率已相当司空见惯了。简单的AM和FM/PM已被淘汰，为更复杂的数字调制方法所取代。二进制相移键控(BPSK) AP2953在基于ARM架构上网本上的应用摘要：该文章主要介绍了高压大功率降压DCDC芯片AP2953在基于ARM架构上网本上的应用，以及AP2953的结构特性，应用设计和使用特点。随着网络速度的提升与普及，低价位、续航时间长的上网本愈来愈受 ＃优秀的学生，需要一套BOOST套件＃LM3478套件——器 目前，在学校里开设的电力电子实验中，斩波电路电路的实验主要还是原理性的验证实验，包含基本的结构：降压斩波电路、升压斩波电路、 升降压斩波电路、Cuk斩波电路、Sepic斩波
|
在线客服1号