Package inductance:(封装电感)
When narrow pulse widths are required, the system designer must take care that circuit inductance is kept to a minimum (note inductances on package list). Using the lower inductance packages will reduce the peak voltage required to obtain the desired drive current. For example, to obtain approximate Gaussian pulse shapes for the “C” and “U” packages:
1. PGAC1S12
Tw = 40ns
Prr = 25Khz
Tr = 20ns
If = 60A
Lcpkg = 12nH
Vl = Lpkg x di/dt
1. Vcpkg = 12 x 10-9 x 60/20 x 10-9= 36 Volts
谁能告诉我这些符号都是什么意思啊?我就能看懂36后面单位是伏特,Tw = 40ns代表40纳秒的脉宽,If = 60A是60安的电流,Prr = 25Khz是25000的频率,Lcpkg = 12nH是12纳亨。
请问Tw为什么不直接用T呢,非得整个Tw干啥啊,不就是代表时间吗?
请问Vl = Lpkg x di/dt是啥意思啊?
请问Vcpkg = 12 x 10-9 x 60/20 x 10-9= 36 Volts又是啥意思啊?
1. 避免混淆
2. 电感电压计算
3. 具体计算 10-9代表10的负9次方。
半桥焊机电部大家好!谁有三乔的空线路板顶一个 MOSFET模块波型确认 帮忙看看这个MOSFET的应用波形如何
什么叫 应用波形 啊?
是哪个脚的波形啊?
应用在电动汽车控制驱动波形3.4.5的波形 一种新型过流保护电路设计摘 要:与多数以 中断 模式实现保护不同,文章提出了一种用于低压差线性稳压器(LDO)的过流保护电路设计新方案,通过 屏蔽电路 屏蔽过流信号,使LDO 不因过流信号干扰而中断运行。为了防止屏蔽时间内的
|