您当前的位置:首页 > 科技前沿

ADI采用3轴数字加速度计的ADXL345血压计解决方案

时间:2015-02-22  来源:扁平线圈电感厂家  点击:

中心议题:

* ADI ADXL345血压计解决方案

ADI公司的血压计解决方案采用3轴±2 g/±4 g/±8 g/±16 g 数字加速度计ADXL345,12位电容-数字转换器AD7152/AD7153, 全速/低速USB数字绝缘器ADuM4160,单电极容性传感器CapTouch可编程控制器AD7147,以及带低部端口和数字输出的iMEMS麦克风ADMP421等器件.本文介绍了血压计解决方案方框图,以及所采用的主要元器件的主要特性,方框图和应用电路等.

1.jpg

图1.电子血压计方框图

主要元器件介绍:

ADXL345: 3-Axis, ±2 g/±4 g/±8 g/±16 g Digital Accelerometer

The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is acces-sible through either a SPI (3- or 4-wire) or I2C digital interface.

The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing appli-cations, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0°.

Several special sensing functions are provided. Activity and inactivity sensing detect t电感位移传感共模电感器器he presence or lack of motion and if the acceleration on any axis exceeds a user-set level. Tap sensing detects single and dou大电流电感ble taps. Free-fall sensing detects if the device is falling. These functions can be mapped to one of two interrupt output pins. An integrated, patent pending 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor intervention.

Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.

The ADXL345 is supplied in a small, thin, 3 mm × 5 mm × 1 mm, 14-lead, plastic package.

ADXL345主要特性:

Ultralow power: as low as 40 μA in measurement mode and 0.1 μA in standby mode at VS = 2.5 V (typical)

Power consumption scales automatically with bandwidth

User-selectable resolution

Fixed 10-bit resolution

Full resolution, where resolution increases with g range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all g ranges)

Embedded, patent pending FIFO technology minimizes host processor load

Tap/double tap detection

Activity/inactivity monitoring

Free-fall detection

Supply voltage range: 2.0 V to 3.6 V

I/O voltage range: 1.7 V to VS

SPI (3- and 4-wire) and I2C digital interfaces

Flexible interrupt modes mappable to either interrupt pin

Measurement ranges selectable via serial command

Bandwidth selectable via serial command

Wide temperature range (?40℃ to +85℃)

10,000 g shock survival

Pb free/RoHS compliant

Small and thin: 3 mm × 5 mm × 1 mm LGA package

ADXL345应用:

Handsets

Medical instrumentation

Gaming and pointing devices

Industrial instrumentation

Personal navigation devices

Hard disk drive (HDD) protection

Fitness equipment

2.jpg

图2. ADXL345方框图

3.jpg

图3.AD7152和AD7153方框图

4.jpg

图4.AD7153差分容性传感器基本应用电路图

Full/Low Speed USB Digital Isolator ADuM4160

The ADuM4160 is a USB port isolator, based on Analog Devices, Inc., iCoupler? technology. Combining high speed CMOS and monolithic air core transformer technology, these isolation components provide outstanding performance characteristics and are easily integrated with low and full speed USB-compatible peripheral device差模电感器s.

Many microcontrollers implement USB so that it presents only the D+ and D? lines to exter一体成型电感nal pins. This is desirable in many cases because it minimizes external components and simplifies the design; however, this presents particular challenges when isolation is required. USB lines must automatically switch between actively driving D+/D?, receiving data, and allowing external resistors to set the idle state of the bus. The ADuM4160 provides mechanisms for detecting the direction of data flow and control over the state of the output buffers. Data direction is determined on a packet-by-packet basis.

大电流电感

迎接八天线LTE测试的挑战 目前,TD-LTE、FDD-LTE和LTE-Advanced(LTE-A)无线技术使用了几种不同的多入多出(MIMO)技术。鉴于MIMO系统的复杂性正在日益提高,相关的测试方法也将更加具有挑战性。例

DSP在LED大屏显示中的应用目前采用的LED大屏幕显示系统的控制电路,大多由单个或多个CPU及复杂的外围电路组成,这种电路设计,单片机编程比较复杂,整个电路的调试比较麻烦,可靠性和实时性很难得到保证。针对这种情况,提出一种SD卡

MC145030(无绳电话和半双工遥控器)红外线、超声
MC145030是红外线、超声波或射频遥控单片数字编码http://www.szmzhg.com/一体成型贴片电感和译码集成电路,适用于无绳电话和半双工遥控器等。内部电路由带使能端的振

注塑加工厂


上一篇通过软件无线电的架构加速无线技术的开发与测试

下一篇火灾报警控制系统解析


  
  温馨提示
网站首页 | 产品展示 | 科技前沿 | 行业资讯
本公司专业研发、设计、生产、销售贴片电感、插件电感、功率电感、大电流电感、扁平线圈电感、一体成型电感。
专业电感生产制造商,品质优异、交期快。
在线客服
热线电话