开关电源" title="开关电源">开关电源" title="开关电源">开关电源(SMPS)控制器,直接从通用火线电压整流输入,适用于5W以下的应用.器件集成了高压(700V)功率开关,无负载功耗小于30mW,具有过压保护(OVP),欠压锁住(UVLO),超温保护(OTP),主要用于5W手机电池充电器,TV和台式PC的待机电源,白色家电电源.本文介绍了TEA1721主要特性和优势,方框图,5 W GreenChip演示板特性,电路图,材料清单和PCB布局图.
The TEA1721 is a small and low cost module Switched Mode Power Supply (SMPS) controller IC for low power applications (up to 5 W) and operates directly from the rectified universal mains input. The device includes a high voltage power switch (700 V) and has been optimized for flyback converter topologies to provide high-efficiency over the entire load range with ultra-low power consumption in the no-load condition. It provides a circuit for start-up directly from the rectified mains voltage without any external bleeder circuits.
The converter 电感器的功能和用途operates as a regulated voltage source from no-load up to the maximum output current and operates as current source that delivers the maximum current over a broad output voltage range. Using the TEA1721, a low power converter can be built at minimum cost and with the minimum number of external components.
The controller regulates the output voltage with primary-side sensing which eliminates the need for an additional secondary feedback circuitry and simplifies the design. At higher power levels, a frequency and current control mode is used. It operates with Burst mode control at low power levels and no-load condition. The burst mode minimizes audible noise and provides an energy saver state which reduces the power consumption in no-load condition. The Burst mode frequency of 1750 Hz enables no-load power consumption below < 30 mW at high mains input.
TEA1721主要特性和优势:
电源特性:
Low power SMPS controller with integrated power switch designed for applications up to 5 W
700 V high voltage power switch for global mains operation
Primary sensing for control of the output voltage without optocoupler and secondary feedback circuitry
Minimizes audible noise in all operation modes
USB battery charging and Energy Star 2.0 compliant
Jitter function for reduced EMI
绿色特性:
Enables no-load power consumption < 30 mW
Very low supply current in no-load condition with energy saver mode
Incorporates a high voltage start-up circuit with zero current consumption under normal switching operation
Available in halogen-free and Restriction of Hazardous Substances (RoHS) SO7 Package
保护功能:
OverVoltage Protection (OVP) on Feedback control (FB) pin with auto-restart
UnderVoltage LockOut (UVLO) protection on IC supply pin
OverTemperature Protection (OTP)
Soft-start by reduced peak current for zero and low output voltage
Demagnetization protection for guaranteed discontinuous conduction mode operation
Open and short-circuit protection of the Feedback control (FB) pin
Short-circuit protection of the charger output
TEA1721应用:
Battery chargers for cellular phones and other low power adapters up to 5 W
Standby supply for TV and desktop PC
Power supply for White Goods applications
图1.TEA1721方框图
TEA1721FT 5 W GreenChip SP小型演示板
This user manual describes a 5 W Constant Voltage (CV) or Constant Current (CC) universal input power supply for mobile phone adapters and chargers. This demo board is based on the GreenChip SP TEA1721FT.
GreenChip SP TEA1721FT enables only 5 % output voltage tolerance at dynamic load behavior with low no-load power dissipation <40 mW. The TEA1721FT design ensures a low external component count for cost-effective applications. In addition, the TEA1721FT provides advanced control modes for optimal performance. The TEA1721FT integrates the 700 V power MOSFET switch and SMPS controller.
5 W GreenChip演示板特性:
• Has only 5 % output voltage tolerance at dynamic load behavior
• Ena电感厂家bles low no-load power dissipation <40 mW
• Low component count for a cost-effective design
• Advanced control modes for optimal performance
• SMPS controller with integrated power MOSFET switch
• 700 V high-voltage power switch for global mains operation
使用NI CompactRIO利用革命性的空中风力发电技 几乎无需学习，CompactRIO和NI LabVIEW开发环境之间的无缝接口提供了交钥匙的软硬件解决方案。 Matt Bennett, WindliftThe Challenge:为偏远村庄或是其 基于BP3309的LED室内照明电源设计 4月08日 第三届·无线通信技术研讨会 立即报名 12月04日 2015•第二届中国IoT大会 精彩回顾 10月30日ETF•智能硬件开发技术培训会 精彩回顾 10月23日ETF•第三届 消费 低功耗运放在便携式医疗设备中的应用近年来，以电池作为电源的电子产品得到广泛使用，设计工程师迫切要求采用低电压的模拟电路来降低功耗。低电压、低功耗、低噪声的模拟电路设计技术正成为研究的热点。从节约能源角度考虑，低的功率消耗不仅是电池驱动
1/2 1 2 下一页 尾页 |
在线客服1号