Powerint公司的DER322参考设计采用LinkSwitch-PL系列LNK460VG器件，是业界首个可替代100W A19白炽灯的LED驱动器，采用单层PCB，具有低成本少元件数和小尺寸特点，230VAC时的效率大于93%，PF大于0.9，230 VAC; 78 V LED时的THD小于20%，集成了包保护和可靠性特性，热关断自动恢复。本文介绍了LinkSwitch-PL系列产品亮点，方框图，典型应用电路以及DER322参考设计主要特性和指标，电路图，材料清单和PCB布局图。
The LinkSwitch-PL family enables a very small and low cost single-stage power factor corrected constant current driver for solid state lighting. Optimized for direct LED current sensing, the LinkSwitch-PL operates over a wide input voltage range delivering an output power of up to 16 W. The LinkSwitch-PL control algorithm provides flicker-free TRIAC dimming with minimal external components.
Each device incorporates a 725 V rated power MOSFET, a novel discontinuous mode variable frequency variable on-time controller, frequency jitter, cycle by cycle current limit and hysteretic thermal shutdown in a monolithic 4-pin IC, available in SO-8C, eSOP-12, and eDIP-12 packages.
LinkSwitch-PL系列产品亮点：
Dramatically Simplifies Off-line LED Drivers
• Flicker-free phase-controlled TRIAC dimming
• Single stage power factor correction and accurate constant current (CC) output
• Very low component count with small non-electrolytic bulk capacitor for compact replacement lamp designs
• Compact SO8, eSOP, and eDIP packages
• Completely eliminates control loop compensation
Advanced Performance Features
• Optimized for non-isolated flyback designs
• Frequency jitter greatly reduces EMI filter size and costs
• Low dissipation direct sensing of LED current
Advanced Protection and Safety Features
• Cycle skipping regulation for abnormally low output power to clamp peak output current delivered
• 725 V integrated power MOSFET allows small bulk capacitance and maximizes power capability
• Short-circuit, overload, open feedback and output overvoltage protection
• Hysteretic thermal shutdown
• Meets high-voltage creepage between DRAIN and all other pins both on PCB and at package
EcoSmart™ - Energy Efficient
• High power factor optimizes system lumen per input VA
• Control algorithm balances switching and conduction losses over line and load to maintain optimum efficiency
图1。LinkSwitch-PL系列功能方框图
图2。LinkSwitch-PL系列典型应用电路图
图3。采用LinkSwitch-PL系列的替代A19白炽灯的5W 15V LED驱动器电路图
DER322参考设计
High Efficiency (>93%), High Power Factor(>0.9), 18 W Output Non-Isolated Buck LED Driver Using LinkSwitchTM-PL LNK460VG
The document describes a non-isolated, high efficiency, high power factor (PF) LED driver designed to drive a nominal LED string voltage of 78 V at 230 mA from an input voltage range of 195 VAC to 265 VAC (47 Hz – 63 Hz). The LED driver utilizes the LNK460VG from the LinkSwitch-PL family of ICs.
The topology used is a single-stage non-isolated buck that meets the stringent space and efficiency requirements for this design. LinkSwitch-PL based designs provide high power factor (>0.9) meeting international requirements.
This document contains the LED driver specification, schematic, PCB details, bill of materials, transformer documentation and typical performance characteristics.
DER322参考设计主要特性：
Single-stage power factor correction combined with constant current (CC) output
Low cost, low component count, small size and single-sided PCB
Highly energy efficient, >93% at 230 VAC input for 78 V LED Load
Integrated protection and reliability features
Single shot no-load protection / output short-circuit protected with auto-recovery
Auto-recovering thermal shutdown with large hysteresis protects both components and PCB
No damage during brown-out conditions
PF >0.9 at 230 VAC
% ATHD <20% at 230 VAC; 78 V LED
Meets IEC ring wave, differential line surge and EN55015 conducted EMI
HFC5203A“请随手关门\语言集成电路图 http://www.dgfpc.com/电感厂家 HFC5203A是大规模CMOS语言集成电路，内储女声“请随手关门”语言，其发音清晰、外围电路简单，采用电平和不保持触发方式，可广泛用于银行、 嵌入式系统中的IIS音频接口技术1 IIS总线 IIS(Integrate Interface of Sound)即集成音频接口，在上个世纪80年代首先被Philips公司用于消费产品的音频设备，并在一个称为LRCLK(Left／R 基于Lonworks技术和无线通信的数据采集与监控系引言目前，现场总线技术在数据采集与监控系统（SCADA）、工业控制、楼宇自动化、智能交通等领域得到了广泛的应用。作为目前流行的现场总线技术之一 Lonworks，以其突出的特点在国内
1/2 1 2 下一页 尾页 |
在线客服1号