您当前的位置:首页 > 公司动态

ADI ADSP-BF527EZ-KITLite评估开发方案

时间:2015-10-19  来源:扁平线圈电感厂家  点击:


ADSP-BF523/BF525/BF527 Blackfin processors. The VisualDSP++development environment aids advanced application code development and debug, such as:

• Create, compile, assemble, and link application programs written in C++, C, and ADSP-BF527 assembly

• Load, run, step, halt, and set breakpoints in application programs

• Read and write data and program memory

• Read and write core and peripheral registers

• Plot memory

Access to the processor from a personal computer (PC) is achieved through a USB port or an external JTAG emulator. The USB interface provides unrestricted access to the ADSP-BF527 processor and evaluation board peripherals. Analog Devices JTAG emulators offer faster communication between the host PC and target hardware. Analog Devices carries a wide range of in-circuit emulation products.

The ADSP-BF527 EZ-KIT Lite provides example programs to demonstrate the evaluation board capabilities.

ADSP-BF527 EZ-KIT Lite评估板主要特性:

• Analog Devices ADSP-BF527 Blackfin processor

• Core performance up to 600 MHz

• External bus performance up to 133 MHz

• 289-pin 0.5 mm pitch mini-BGA package

• 25 MHz oscillator

• Synchronous dynamic random access memory (SDRAM)

• Micron MT48LC32M16A2TG – 64 MB (8M x 16 bits x 4 banks)

• Parallel flash memory

• ST Micro M29W320EB – 32 Mb (2M x 16 bits)

• NAND flash memory

• Numonyx NAND04 – 4 Gb

• SPI flash memory

• ST Micro M25P16 – 16 Mb

• Internal audio codec

• Low-power audio codec

• One stereo LINE OUT jack

• One input MIC jack

• One input stereo LINE IN jack

• TFT LCD display with touchscreen

• Sharp LQ035Q1DH02 320 x 240 3.5’’ touchscreen LCD

• Analog Devices AD7879-1 four-wire touchscreen controller

• Ethernet interface

• SMSC LAN8700 PHY device

• 10-BaseT and 100-BaseTX Ethernet controller

• Auto-MDIX

• Keypad

• Analog Devices ADP5520 keypad controller

• ACT components– 4 x 4 keypad assembly

• Thumbwheel

• CTS Corp rotary encoder

• Universal asynchronous receiver/transmitter (UART)

• ADM3202 RS-232 line driver/receiver

• DB9 female connector

• LEDs

• Ten LEDs: one power (green), one board reset (red), three general-purpose (yellow), one USB monitor (amber), PHY link (yellow), PHY activity (green), keypad controller (red), and FPGA done (yellow)

• Push buttons

• Three push buttons: one reset, two programmable flags with debounce logic

• Expansion interface

• Provides access to all ADSP-BF527 processor signals

• Other features

• JTAG ICE 14-pin header

• USB OTG connector

• HOST interface connector

• Power measurement jumpers

• PPI IDC connector

• SPORT0 and SPORT1 IDC connectors

• TWI, SPI, timers, and UART0 IDC connectors

The ADSP-BF527 EZ-KIT Lite® provides developers with a cost-effective method for initial evaluation of the ADSP-BF527 Blackfin® Processors via a USB-based, PC-hosted tool set. With this EZ-KIT Lite, users can learn more about the Analog Devices (ADI) ADSP-BF527 hardware and software development, and quickly prototype a wide range of applications.

Blackfin Processor desktop evaluation board along with an evaluation suite of the VisualDSP++® development and debugging environment, including the C/C++ compiler, assembler, and linker. The evaluation suite of VisualDSP++ is designed to be used with the EZ-KIT Lite only.

The EZ-KIT Lite ships with with a landscape, Low Power QVGA Touch Screen LCD panel, a set of Stereo Headphones and all of the necessary supplemental cables (USB, Ethernet, etc.).


图2.ADSP-BF527 EZ-KIT Lite评估板外形图

ADSP-BF527 EZ-KIT Lite评估板主要特性:

ADSP-BF527 Processor: 289 Ball mBGA, 600MHz; LFBGA-SS2, 12mmX12mm/0.5 pitch, 4L, (A02)

SDRAM: 64 MB, 32M x 16; Micron MT48LC32M16A2 3.3V

FLASH: 4 MB (2M x 16 ); Numonyx M29W320EB70ZE6E 3.3V

NAND FLASH: 4 Gb Numonyx NAND04; NAND04GW3B2B 3.3V

SPI FLASH: 16 Mb Numonyx M25P16-VMW6G 3.3V

Thumbwheel: CTS Corp, Rotary Encoder, 2 Bit Binary, CT2999-ND

大电流电感

boost电路 新人一枚,第一次自己做boost电路,结果却不怎么正确,


输入是9~15V,输出24V,输出电流大于1A,


测试结果却是不到20V,效率也很低,


下面是电感的波形,电路也在下面,求助各位高手

AKMAK7782双路音频信号处理解决方案AKM 公司的AK7782是集成24位5路ADC和SRC的双路音频信号处理器(DSP),同时还集成了8:2立体声输入选择器,取样速率转换器,速率高达96kHz,ADC取样频率从7.35kHz 到96k

一种雷达防追尾预警系统工作原理 追尾碰撞是目前我国高速公路各类事故中较多的一类事故,占事故总数的33%左右。根据对沈大、合宁、广深、西临等高速公路交通事故的统计分析,交通事故类型如表1所示。有关研究表明,若驾驶员能够提早1 秒意识

注塑加工厂


上一篇杰控FameView和ABBAC500PLC在线烟气监测行业中的应用

下一篇基于MPC8280的IMA E1数据采集系统


  
  温馨提示
网站首页 | 产品展示 | 科技前沿 | 行业资讯
本公司专业研发、设计、生产、销售贴片电感、插件电感、功率电感、大电流电感、扁平线圈电感、一体成型电感。
专业电感生产制造商,品质优异、交期快。
在线客服
热线电话